Phase 1: Acceptance of the application: Upon receipt of an application that meets the requirements, the certification body will provide the applicant with a declaration of acceptance to inform the applicant of the sending or sending of relevant documents and materials.

Phase 2: Data Review: During the data validation phase, product certification engineers must divide the application into units. If a sample test is required, the product certification engineer will send a sample notification to the applicant after the unit has been split.

Phase 3: Sample Receipt: The sample is sent by the applicant or the certification body to the notified body.

Phase 4: Sample testing: During the sample test, the applicant must correct the sample mismatch according to the sample test certificate. After completion of the sample test, the testing organization must complete the sample test result notification and submit the test report and other data to the certification body.

Phase 5: Factory Audit: For applications that require factory inspections, the certification body organizes factory inspections.

Stage 6: Conformity Assessment: Product Certification Engineers conduct an initial assessment after collecting and arranging the results of each phase. The conformity assessor re-evaluates the above results.

Phase 7: Certificate Approval: Certification Body Issuing Certificate

Phase 8: Certificate Print, Receive, Send and Manage: The data is collected by the applicant or a certificate must be sent.

Here you can see special regulations for CCC certification.
CCC认证就是中国强制性产品认证的简称。在CCC认证目录内的产品需要获得CCC证书和标志批准书后方可在中国市场销售。
CCC认证过程主要包括:申请资料的提交,申请资料的审核,样品的检测,工厂审核,证书和标志批准书的发放。

CCC News

Explosion protection products CCC relevant Explosion protection products CCC relevant 2019-07-17 - according to a recent announcement of CNCA, explosion protection...
374 new and revised GB Standards released 374 new and revised GB Standards released 2019-07-09 - According to a recent press from the State Council of P.R.C,...
173 new and revised GB Standards released 173 new and revised GB Standards released 2019-06-16 - According to a recent press from the State Council of P.R.C,...
business scopes of accredited testing laboratories for CCC products updated business scopes of accredited testing laboratories for CCC products updated 2019-05-30 - according to a recent announcement of CNCA, business scope...
Geely set up engineering R & D center in Germany Geely set up engineering R & D center in Germany 2019-05-18 - According to the China News Service Beijing on May 16 that...
Implementation Rules for Urban Rail Transit Equipments Released Implementation Rules for Urban Rail Transit Equipments Released 2019-05-06 - According to a recent announcement from the China Certification...
business scopes of test laboratories for China CCC products updated business scopes of test laboratories for China CCC products updated 2019-04-29 - business scopes of selected test laboratories for China CCC...
21 new and revised GB Standards released 21 new and revised GB Standards released 2019-04-19 - According to a recent press from the State Council of P.R.C,...
177 new and revised GB Standards released 177 new and revised GB Standards released 2019-04-04 - According to a recent press from the State Council of P.R.C,...
Daimler will invest 500 million euros to produce electric vehicles Daimler will invest 500 million euros to produce electric vehicles 2019-03-24 - The Daimler Group will invest 500 million euros (approximately...

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top