October 1st. 2018 is China's National Day, followed by a week of legal holidays. This week is also known as the Chinese Golden Week. Chinese companies and government authories like Chinese Certification organizations will be closed during the Golden Week holiday, and will be resumed normal work on October 8th. 2018.
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us

according to the latest press by the China Automotive Technology and Research Center (CATARC), CATARC and VDA signed a Memorandom of Understanding (MoU) witnessed by the chinese Premier Li Keqiang and the German Chancellor Angela Merkel on 9-10 July 2018. The China-Germany ICV standard and regulation will be established and a long-term and steady cooperative partnership between these two organisations will be build up under the spirits of “facing the future, equal and mutual benefit and win-win”.

Motor vehicle and a list of vehicle components need a China CCC Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CATARC News

according to a current announcement of the CNCA ("Certification and Accreditation Administration of the People's Republic of China"), certification qualification of 4 chinese certification bodies were revoked after a following-up inspection:
 
- Zhong Biao An Xin Inspection and Certification (Beijing) Co. Ltd.(certification body approval number: CNCA-R-2016-220): quality management system, environmental management system, occupational health and safety management system;
- Beijing Ai Mi Sai Bo Inspection and Certification Co., Ltd. (certification body approval number: CNCA-R-2016-279): quality management system, environmental management system, occupational health and safety management system;
- Beijing Education Certification Service Co., Ltd. (certification body approval number: CNCA-R-2017-298), education services;
- Bo Na Di Inspection and Certification (Beijing) Co., Ltd. (certification body approval number: CNCA-R-2017-312), wholesale and retail services.
 
The reason was that these certification bodies have less than 10 fix-term employed auditors. It is recommend that factories or companies which hold valid certificates of the above-mentioned certification bodies should select another approved certification body with the corresponding certification qualification to convert the certificates. 
 
If you have any questions about, quality management system (ISO9001), environmental management system (ISO14001), occupational health and safety management system (ISO 45001), or China CCC Certification, please use the Contact Us page.
 

according to a recent announcement of CNCA, explosion protection products are CCC relevant from 01 October 2019. Explosion protection productsmust be CCC certified til 01 October 2020, i.e., explosion protection products can not be enter into and sold in the chinese market without CCC Certification from 01 October 2020. Here are a list of relevant explosion protection products:

CNCA-C23-01: 2019 Implementation Regulation for Explosion-proof electrical appliances
Explosion-proof motors,
Explosion-proof electric pump
Explosion-proof power distribution equipment
Explosion-proof switch, control and protection products
Explosion-proof starter products
Explosion-proof transformer products
Explosion-proof electric actuator, solenoid valve products
Explosion-proof plug-in device
Explosion-proof monitoring products
Explosion-proof communication, signal device
Explosion-proof air conditioning, ventilation equipment
Explosion-proof electric heating products
Explosion-proof accessories, Ex components
Explosion-proof instrumentation products
Explosion-proof sensor
Explosion-proof safety barrier products
Explosion-proof instrument box products
 
CNCA-C24-01: 2019 Implementation Regulation for Household Gas Appliances
Household gas cooker
Domestic gas fast water heater
Gas heating water heater
 
CNCA-C07-01: 2017 Implementation Regulation for household and similar equipment
Household refrigerators and food freezers
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 

According to a recent press from the State Council of P.R.C, 374 new and revised GB Standards ("GB", "GuoBiao") were released on 4 June 2019 by the Standardization Administration of the People's Republic of China (SAC) . Here are a list of GB Standards which are relevant to automobile products:

GB Standard Name Implementation Date
GB/T 5068-2019 Steel for railway locomotives and vehicle axles 2020-05-01
GB/T 19951-2019 Road vehicles Test methods for immunity to electrostatic discharge from electrical/electronic components 2020-01-01
GB/T 22135-2019 Commissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones 2020-01-01
GB/T 27542-2019 Battery Pallet Truck 2020-01-01
GB/T 37532-2019 Urban rail transit city express line 120 km / h ~ 160 km / h vehicle general technical conditions 2020-01-01
GB/T 37536-2019 Inspection specifications for testing equipment during motor vehicle inspection agencies 2020-01-01
GB/T 37677-2019 plain bearing automotive crankshaft bearing bush working environment recommended parameters 2020-01-01
 
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure
 
According to a recent press from the State Council of P.R.C, 173 new and revised GB Standards ("GB", "GuoBiao") were released on 10 May 2019 by the Standardization Administration of the People's Republic of China (SAC) . Here are a list of GB Standards which are relevant to automobile products:
 
GB Standard Name Implementation Date
GB/T 5624-2019 Automotive Maintenance Terminology 2019-12-01
General technical requirements for GB/T 17275-2019 freight towbar trailers GB/T 2019-12-01
GB/T 25024-2019 Locomotive bogies Freight car bogie GB/T 2019-12-01
GB/T 26766-2019 Urban public steam car vehicle intelligent terminal GB/T 2019-12-01
GB/T 37427-2019 Plastic acrylonitrile-butadiene-styrene (ABS) special materials for automobiles 2020-04-01
GB/T 37436-2019 Intelligent Transportation System Extended Reversing Auxiliary System Performance Requirements and Test Methods 2019-12-01
GB/T 37474-2019 Methods and requirements for the test of misuse of automotive airbag systems 2019-12-01
B/T 37706-2019 Technical requirements for installation and use of lifting tailgates for vehicles 2019-12-01
 
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure
 
according to a recent announcement of CNCA, business scope of the following accredited testing laboratories for China CCC products was updated as follows:
 
Zhejiang Fangyuan Testing Co. Ltd.
CNCA-C02-01: Circuit Switch and Electrical Equipment for Protection or Connection (Electrical Accessories)
 
Zhejiang Kezheng Electronic Information Product Testing Co. Ltd.
CNCA-C08-01: Audio and video equipment
CNCA-C09-01: Information Technology Equipment
CNCA-C16-01: The following products in telecom terminal equipment
 
Guangdong Jingzheng Testing Co. Ltd.
CNCA-C22-02: Toy Products
 
Jiangsu Jingrui Testing Technology Co. Ltd.
CNCA-C11-07:The following products in household and similar equipment
CNCA-C11-09: Automotive interior parts
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 

According to the China News Service Beijing on May 16 that the research and development center set up by Geely Automobile Group in Raunheim, Germany, has officially started its operations. The R&D center is close to Frankfurt Airport in Germany and will form a R&D team with about 300 engineers in the future to accelerate the technological development and business development of Geely Automobile Group in the new energy field. According to reports, the establishment of Geely Germany R&D Center will further improve Geely's global engineering research and development system. At present, Geely Automobile Group has five R&D centers. In addition to the above-mentioned new institutions, Geely Automobile Research Institute in Hangzhou Bay, Ningbo, China, Geely Automobile Europe R&D Center (CEVT) in Gothenburg, Sweden, and Hangzhou, China. R&D center in Coventry, UK. At present, Geely Automobile Group has more than 20,000 R&D designers, of which more than 2,500 are R&D experts in the field of new energy.

Motor vehicle and a list of vehicle components need a China Compulsory Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CAAM News

 

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top