The low beam of the new Audi A8 headlights is equipped with a compact LED lens module featuring. The module consists of glass and integrated primary and secondary optics to minimize Scatter loss. According to reports, Audi and Hella have cooperated to launch several front lamp products to provide more sccurate and dynamic lighting services while enhancing the driver's vision. The two companies provided a high-performance LED lens module for the new Audi A8, which was mass-produced for the first time. In addition, they also developed the new HD Matrix LED headlight technology and dynamic laser high beam technology.
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
GB 14907-2018 "Steel Structure Fire Retardant Coatings" approved by the National Standardization Administration Committee was issued on November 19, 2018, and began to be implemented on June 1, 2019. In order to strictly enforce the China Compulsory Certification (China CCC) requirements of product standards and ensure the safe and reliable use of steel structure fireproof coating products, the notice is as follows:
All steel structure fireproof coating manufacturers should complete the relevant work of design, process, procurement and factory inspection capabilities in accordance with the relevant provisions of GB 14907-2018 "Steel Structure Fireproof Coatings" as soon as possible to ensure the quality of steel structure fireproof coating products after the implementation of the standards and meet the new standard requirements.
From the date of implementation of the new standard, the production and ex-factory of steel structure fireproof coating products shall be strictly in accordance with the requirements of GB 14907-2018 "Steel Structure Fire Retardant Coatings". Products that do not comply with the new version standards shall not be manufactured after June 1, 2019.
The original certificate of the certified enterprise shall be promptly carried out for certificate conversion. China Certification Center for Fire Products will release the certificate conversion requirements in the near future, and please pay attention to the company in a timely manner.
Motor vehicle and a list of vehicle components need a China CCC (China Compulsory Certification) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
The World Manufacturing Plant Identification Number (WMI) is the first part of the Vehicle Identification Number (VIN) to indicate the manufacturer of the vehicle. The WMI shall consist of a 3-digit code that ISO authorizes the Society of Automotive Engineers (SAE) to maintain and verify (see GB/T 16737-1997). International Standard for Vehicle Identification Number (VIN) recommends that the manufacturer indicate the assembly plant at the 11th digit of the VIN, i.e. the assembly code. The assembly code and the world manufacturer identification code (WMI) together, the location of the vehicle can be determined. Here you can find the latest list of imported motor vehicle manufacturer name and vehicle brand in China. This list will be updated permanently. The last update was on 29 December 2018.
Motor vehicle and vehicle components need the China CCC Certification ("China Compulsory Certification") in order to enter into the chinese market. If you have any questions, please Contact Us. For general information about China CCC please look through the chapter CCC procedure.
According to a recent press from the Standardization Administration of the People's Republic of China (SAC), 657 new and revised GB Standards ("GB", "GuoBiao") were released on 28 December 2018. Here are GB Standards which are relevant to automotive products.
GB/T 22038-2018 Test method for static grounding pressure distribution of automobile tires (replaced GB/T 22038-2008)
GB/T 36987-2018 Automobile anti-lock braking system (ABS) performance testing method (new GB Standard)
implementation date: 2019-07-01
GB/T 36990-2018 Car grease classification (new GB Standard)
implementation date: 2019-07-01
GB/T 37123-2018 Automotive electric drive air conditioner (new GB Standard)
implementation date: 2019-07-01
You can finde here more new and revised GB Standards.
Motor vehicle and vehicle components need China Compulsory Certificationa (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
The new GB standard GB 4343.1-2018 "Electromagnetic compatibility requirements for household appliances, power tools and similar appliances Part 1: introduction" was released on May 14th 2018. It will be implemented on June 1, 2020, replacing GB4343.1-2009. The relevant requirements for the implementation of the new GB standard for power tools and household equipments of China Compulsory Certification (China CCC) are as follows:
- the new version of the GB standard is relevant for household equipments including household refrigerators and food freezers, electric fans, air conditioners, household electric washing machines, vacuum cleaners, skin and hair care appliances , electric irons and rice cookers.
- Until June 1, 2020, applicants may voluntarily choose to apply for the China Compulsory Certification (China CCC) according to the new or old standards.
- From June 1, 2020, the certification body will according to the new standard to implement the China Compulsory Certification (China CCC) and issue a new standard version of the CCC certificate.
- The follow-up inspection is based on the standard version listed in the valid certificate.
- For products that have been certified according to the old standard, enterprise can do the deviation tests carried out by the laboratory and the CCC Certificate shall be replaced with the new standard version after passing the tests.
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us.
On February 18, 2019, Shanghai Mobile officially started construction of 5G network at Hongqiao Railway Station. This will be the first railway station to build a 5G indoor digital system. It is planned to complete 5G network deep coverage in 2019. By then, the majority of passengers will enjoy high-speed, convenient 5G network services. This move will lay a solid foundation for Shanghai to build a “double-gigabit broadband city” (both mobile communication networks and fixed broadband networks achieve Gigabit city coverage). The solution that Shanghai Mobile and Huawei have come up with is 5G DIS – this product developed in Shanghai is a 5G indoor product that is commercially available in the industry, and has already been shipped in batches. Supporting 5G commercial construction needs, 5G DIS is undoubtedly an important choice for operators. The industry believes that the 5G base stations deployed by many manufacturers are mainly concentrated outdoors, and the 5G indoor digital system begins to layout, marking the continuous coverage of 5G full scenes is about to become a reality.
Telecommunications terminal equipments require China Compulsory Certification (China CCC ) in order to enter into the chinese market. If you have any questions, please use the Contact Uspage. For general information on the China CCC please look through the chapter CCC procedure.
In accordance with the relevant provisions of the "Regulations on the Certification and Accreditation of the People's Republic of China" and the "Regulations on the Administration of Compulsory Product Certification", the Certification and Accreditation Administration (CNCA) together with the local certification and supervision departments have supervised and inspected China CCC certified products in the field of Wire and cable, home appliances, lamps, circuit breakers, toys, automotive parts, etc, covering 2,682 batches of products of 1,700 production enterprises in the field of production and distribution (including e-commerce). Upon inspection, it was found that 232 batches of sampled products had non-conformities involving safety items and did not meet the relevant requirements of China CCC Certification. According to the relevant provisions of the China CCC Certification, the relevant certification body has processed the revocation of the CCC certificate for the above-mentioned certified products that are not qualified for the safety project. According to the relevant regulations, the product information of the above revoked CCC certificate is now announced, more detailed about revoked CCC Certificates please see here
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us
You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us
We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.
In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.
Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.
The contents of this page may not be copied or distributed without prior permission.
We assume no liability for links to third parties. All information and services are non-binding and subject to change
according to the terms and conditions.