CNCA ("Certification and Accreditation Administration of PRC") published a list of new testing labs for China CCC products on 11 Oktober 2018:

Laboratory no. Name Business Scope
13001 CQC Intime Testing Technology Co.,Ltd. CNCA-C01-01: Wire and cable
CNCA-C11-09: Automotive interior parts
17201 China General Certification Center Guangzhou Branch CNCA-C04-01: Low power motor
21001 NHT JiuXi Testing Lab CNCA-C11-09: Automotive interior parts
10701 Chongqing Measure Quality Detection Institute CNCA-C07-01: Household and similar equipment
20601 Shenzhen Intertek, Guangzhou Branch CNCA-C07-01: Household and similar equipment
00202 Beijing TIRT Technology Service Co., Ltd. Suzhou Branch CNCA-C10-01: Lighting Appliance
18701 PTC-Testing and Certification Co., Ltd CNCA-C10-01: Lighting Appliance

Further information can be found at  CNCA Announcement (No.38, 2018)

For general information about the China CCC, please look at chapter CCC through CCC procedure. If you have any questions, please contact us.

On October 1st, the China CCC Certification Self-Declaration compliance information reporting system is officially launched. From now on, companies that apply for the China CCC certification for specific products may voluntarily use self-declaration methods to prove that their products continue to meet the relevant requirements of China CCC certification and after the product conformity information is reported, the CCC Mark is added to the product. This new certification process is the latest method in the reform of the China Compulsory Certification system, which will further reduce the cost of enterprises, strengthen the responsibility of market entities, optimize the business environment, and stimulate market vitality.
 
In accordance with the "Opinions of the State Council on Strengthening the Construction of Quality Certification System to Promote Total Quality Management" (Guo Fa [2018] No. 3), in June this year, the State Administration for Market Regulation (SAMR) and the Certification and Accreditation Administration (CNCA) jointly issued the Catalogue on Reform and Adjustment of China Compulsory Certification and Announcement of the Implementation Regulations (No.11.2018 SAMR), a number of products in the certification catalogue has been reduced from 160 to 141. At the same time, the audio and video equipment, information technology equipment, low-voltage electrical appliances, low-power electric motors, electric welders, 20 products with stable quality and low safety risk in the fields of household and similar equipment, motor vehicles and safety accessories, etc. allowing companies to use self-declaration evaluation methods instead of third-party certification. Companies can continue choosing to use the current third-party China CCC certificaiton process, e.g. CQC, CCAP, CAQC, etc.
 
The contact person who is in charge of the Certification and Supervision Department of the State Administration for Market Regulation (SAMR) introduced that the self-declaration evaluation method will, on the one hand, help the company to speed up and increase the efficiency of product development, effectively reduce institutional transaction costs, and stimulate independent innovation. And on the other hand, the self-declaration evaluation method puts forward higher requirements for enterprises to assume responsibility for quality risks. By strengthening post-event supervision, it increases penalties for violations of laws and regulations, and helps to strengthen the sense of responsibility of enterprises, to create a fair market environment. In addition to this, the self-declaration compliance information reporting system is the information base of big data supervision, and the system is connected with the national enterprise credit information system to achieve a limited situation of dishonesty, which helps to promote corporate quality and integrity system construction to improve market supervision efficiency.
 
Source: News SAMR
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us

According to a recent press released from the State Administration for Market Regulation ("SAMR") and the Standardization Administration of the People's Republic of China (SAC), 454 New GB Standards ("GB", "GuoBiao") were approved on 17 September 2018 and will be released, e.g. automobile wheel safety performance requirements and test methods, indoor fire hydrant, etc.

If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: SAMR News

According to a joint announcement by the SAMR ("State Administration for Market Regulation") and the CNCA ("Certification and Accreditation Administration of the PRC") on 15 June 2018, a new certification procedure "self-declaration" were firstly introduced in China and it comes into force on 1 October 2018. This new certification procedure is avaiable for a list of selected products that are within the scope of CCC Product category. Recently, a list of by CNCA accredited test labs were invited to test the new platform, which calls CCC Product Self Declaration Conformity Information Submission System (see here). Companies in China can register for this platform. The prerequisite condition for the registration is that the company must have a place of business and legal personality in China. Our team will continue to pay attention to the relevant information about the China CCC self declaration.

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

 

 

on 11 June 2018, a list of products were deleted from the ccc category, which means these products are no longer subject to China CCC Certification (see "CCC product category changed"). According to a recent accouncement released by the CNCA ("Certification and Accreditation Administration of the PRC"), for those non-ccc products, factory should stop using ccc mark. If it is not possible for some reasons, such as, the CCC mark is affixed by molding or printing on the product, factory can use ccc mark until natural transition e.g. through tools adaptation, inventory turnover of products or packaging, etc. If the factory affixes the standard CCC mark ("sticker") on the product, the CCC mark shall not be affixed from the date of invalidation of the CCC certificate.

If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CNCA No.35.2018

 

 

 

 

 

 

 

With the rapid development of China and Germany in the field of autonomous driving and intelligent networked vehicles, the cooperation between Chinese and German enterprises is also in full swing. Recently, Baidu, the domestic auto-driving giant, and Daimler, the German auto industry giant, announced that they will deepen strategic cooperation in the fields of autonomous driving and vehicle networking. In the future, the two sides will establish closer cooperation and promote the rapid development of the global autonomous driving industry. In early July 2018, Daimler became the first international automaker to receive a road test license for self-driving vehicles in Beijing. It is reported that the licensed Mercedes-Benz autopilot test vehicle is powered by the Baidu Apollo open platform. Autopilot technology. At present, these test vehicles have been extensively tested in the test site of Haidian District, Beijing. In the future, both parties will continue to add new test environments on the open roads of open testing and dedicated test sites to improve the complexity of the scene.

Motor vehicle and a list of vehicle components need a China CCC Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CAAM News

 

According to a recent announcement by the CNCA ("Certification and Accreditation Administration of the PRC", "中国国家认证认可监督管理委员"), a new implementation rules for E-bike CNCA-C11-16: 2018 was released on 19 July 2018,and it comes into force on 1 August 2018. Here are the certification organisations CQC, CCAP, CCLC, QTCTC, SMQ which are responsibile for CCC Certification for E-bike. Hier is a list of test laboratories for testing E-bike.

you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CNCA notice No.31.2018, No.32.2018

According to a recent press released from the Standardization Administration of the People's Republic of China (SAC),  160 New GB Standards ("GB", "GuoBiao", "国标") released on 13 July 2018. Here you can find a part of new GB Standards that are relevant to automotive products. 

GB/T 273.2-2018 Rolling bearings - Overall dimensions - Part 2: Thrust bearings
GB/T 7813-2018 Rolling bearings Split vertical housings Dimensions
GB 13895-2018 Heavy Duty Vehicle Gear Oil (GL-5)
GB/T 26949.16-2018 Industrial vehicles Stability verification Part 16: Walker vehicles
GB/T 26949.9-2018 Industrial vehicles - Stability verification - Part 9: Counterbalanced forklifts carrying cargo containers of 6 m or more length
GB/T 36507-2018 Industrial vehicles Safety regulations for use, operation and maintenance
GB/T 36516-2018 Iron chrome aluminum fiber filament for motor vehicle purification filter
GB/Z 36517-2018 Rolling bearings Calculation method for bearing correction reference rated life under general load conditions

New GB Standards in other field, please see here.

If you have any questions, please use the Contact Us page. For general information on the CCC please look through the chapter CCC procedure.

 

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top