According to a recent press released from the State Administration for Market Regulation ("SAMR") and the Standardization Administration of the People's Republic of China (SAC), 7 New GB Standards ("GB", "GuoBiao") were released on 28 September 2018. They will be implemented on 01 April 2019.
 
GB/T 36668.1-2018 Status monitoring and fault diagnosis of rides - Part 1: General
 
GB/T 36668.2-2018 Amusement facilities condition monitoring and fault diagnosis Part 2: Acoustic emission monitoring method
 
GB/T 36668.3-2018 State of the ride monitoring and fault diagnosis - Part 3: Infrared thermal imaging monitoring method
 
GB/T 36721-2018 Museum Open Service Specification
 
GB/T 36736-2018 Flower Recreation Area Construction and Service Specification
 
GB/T 36737-2018 leisure greenway service specification
 
GB/T 36740-2018 Business and Leisure Area Service Specification
 
If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: SAC News

On October 22, 2018, Premier Li Keqiang presided over the State Council executive meeting. At the meeting, it was decided to further promote the implementation of the business environment policy, establish a private enterprise bond financing support tool, and build a national “Internet + supervision” system. It was also mentioned at the meeting that in order to further reduce the burden on enterprises, it was decided to cancel more than 10% of the types of products subject to China Compulsory Certification (China CCC) or to implement them by CCC self-declaration. 

For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us.

Source: Chinese Government News

 

CNCA ("Certification and Accreditation Administration of PRC") published a list of new testing labs for China CCC products on 11 Oktober 2018:

Laboratory no. Name Business Scope
13001 CQC Intime Testing Technology Co.,Ltd. CNCA-C01-01: Wire and cable
CNCA-C11-09: Automotive interior parts
17201 China General Certification Center Guangzhou Branch CNCA-C04-01: Low power motor
21001 NHT JiuXi Testing Lab CNCA-C11-09: Automotive interior parts
10701 Chongqing Measure Quality Detection Institute CNCA-C07-01: Household and similar equipment
20601 Shenzhen Intertek, Guangzhou Branch CNCA-C07-01: Household and similar equipment
00202 Beijing TIRT Technology Service Co., Ltd. Suzhou Branch CNCA-C10-01: Lighting Appliance
18701 PTC-Testing and Certification Co., Ltd CNCA-C10-01: Lighting Appliance

Further information can be found at  CNCA Announcement (No.38, 2018)

For general information about the China CCC, please look at chapter CCC through CCC procedure. If you have any questions, please contact us.

On October 1st, the China CCC Certification Self-Declaration compliance information reporting system is officially launched. From now on, companies that apply for the China CCC certification for specific products may voluntarily use self-declaration methods to prove that their products continue to meet the relevant requirements of China CCC certification and after the product conformity information is reported, the CCC Mark is added to the product. This new certification process is the latest method in the reform of the China Compulsory Certification system, which will further reduce the cost of enterprises, strengthen the responsibility of market entities, optimize the business environment, and stimulate market vitality.
 
In accordance with the "Opinions of the State Council on Strengthening the Construction of Quality Certification System to Promote Total Quality Management" (Guo Fa [2018] No. 3), in June this year, the State Administration for Market Regulation (SAMR) and the Certification and Accreditation Administration (CNCA) jointly issued the Catalogue on Reform and Adjustment of China Compulsory Certification and Announcement of the Implementation Regulations (No.11.2018 SAMR), a number of products in the certification catalogue has been reduced from 160 to 141. At the same time, the audio and video equipment, information technology equipment, low-voltage electrical appliances, low-power electric motors, electric welders, 20 products with stable quality and low safety risk in the fields of household and similar equipment, motor vehicles and safety accessories, etc. allowing companies to use self-declaration evaluation methods instead of third-party certification. Companies can continue choosing to use the current third-party China CCC certificaiton process, e.g. CQC, CCAP, CAQC, etc.
 
The contact person who is in charge of the Certification and Supervision Department of the State Administration for Market Regulation (SAMR) introduced that the self-declaration evaluation method will, on the one hand, help the company to speed up and increase the efficiency of product development, effectively reduce institutional transaction costs, and stimulate independent innovation. And on the other hand, the self-declaration evaluation method puts forward higher requirements for enterprises to assume responsibility for quality risks. By strengthening post-event supervision, it increases penalties for violations of laws and regulations, and helps to strengthen the sense of responsibility of enterprises, to create a fair market environment. In addition to this, the self-declaration compliance information reporting system is the information base of big data supervision, and the system is connected with the national enterprise credit information system to achieve a limited situation of dishonesty, which helps to promote corporate quality and integrity system construction to improve market supervision efficiency.
 
Source: News SAMR
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us

According to a recent press released from the State Administration for Market Regulation ("SAMR") and the Standardization Administration of the People's Republic of China (SAC), 454 New GB Standards ("GB", "GuoBiao") were approved on 17 September 2018 and will be released, e.g. automobile wheel safety performance requirements and test methods, indoor fire hydrant, etc.

If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: SAMR News

According to a joint announcement by the SAMR ("State Administration for Market Regulation") and the CNCA ("Certification and Accreditation Administration of the PRC") on 15 June 2018, a new certification procedure "self-declaration" were firstly introduced in China and it comes into force on 1 October 2018. This new certification procedure is avaiable for a list of selected products that are within the scope of CCC Product category. Recently, a list of by CNCA accredited test labs were invited to test the new platform, which calls CCC Product Self Declaration Conformity Information Submission System (see here). Companies in China can register for this platform. The prerequisite condition for the registration is that the company must have a place of business and legal personality in China. Our team will continue to pay attention to the relevant information about the China CCC self declaration.

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

 

 

on 11 June 2018, a list of products were deleted from the ccc category, which means these products are no longer subject to China CCC Certification (see "CCC product category changed"). According to a recent accouncement released by the CNCA ("Certification and Accreditation Administration of the PRC"), for those non-ccc products, factory should stop using ccc mark. If it is not possible for some reasons, such as, the CCC mark is affixed by molding or printing on the product, factory can use ccc mark until natural transition e.g. through tools adaptation, inventory turnover of products or packaging, etc. If the factory affixes the standard CCC mark ("sticker") on the product, the CCC mark shall not be affixed from the date of invalidation of the CCC certificate.

If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CNCA No.35.2018

 

 

 

 

 

 

 

With the rapid development of China and Germany in the field of autonomous driving and intelligent networked vehicles, the cooperation between Chinese and German enterprises is also in full swing. Recently, Baidu, the domestic auto-driving giant, and Daimler, the German auto industry giant, announced that they will deepen strategic cooperation in the fields of autonomous driving and vehicle networking. In the future, the two sides will establish closer cooperation and promote the rapid development of the global autonomous driving industry. In early July 2018, Daimler became the first international automaker to receive a road test license for self-driving vehicles in Beijing. It is reported that the licensed Mercedes-Benz autopilot test vehicle is powered by the Baidu Apollo open platform. Autopilot technology. At present, these test vehicles have been extensively tested in the test site of Haidian District, Beijing. In the future, both parties will continue to add new test environments on the open roads of open testing and dedicated test sites to improve the complexity of the scene.

Motor vehicle and a list of vehicle components need a China CCC Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CAAM News

 

Components in the vehicle interior and engine compartment are combustible materials.

FAQ

You have general questions about the CCC. This page gives you a brief overview of the topics that you will be accompanying at the CCC. For more details about your product you can look around in the product area.
In this section you will get a list of all products which are relevant to CCC. Here you can see the most important informations and laws.
The CCC certification process consists of eight phases: application, verification of documents, provision of test samples, testing of samples, factory inspection, conformity assessment, certificate approval, certificate issuance.
Automobiles are non-rail vehicles that are powered, have four or more wheels, and non-powered road vehicles that are designed and manufactured to be towed by vehicles and can normally be used on roads.
3C certification is referred to as a "mandatory product certification system". It is a product conformity assessment system for the Chinese government to protect consumers' personal safety and national security, to strengthen product quality management, and to implement it in accordance with laws and regulations. The so-called 3C certification is China's compulsory product certification system, the English name China Compulsory Certification, the English abbreviation CCC.

CCC News

21 new and revised GB Standards released 21 new and revised GB Standards released 2019-04-19 - According to a recent press from the State Council of P.R.C,...
177 new and revised GB Standards released 177 new and revised GB Standards released 2019-04-04 - According to a recent press from the State Council of P.R.C,...
Daimler will invest 500 million euros to produce electric vehicles Daimler will invest 500 million euros to produce electric vehicles 2019-03-24 - The Daimler Group will invest 500 million euros (approximately...
GB Standards for China CCC automobile products updated GB Standards for China CCC automobile products updated 2019-03-17 - according to a recent announcement of CNCA (China National...
Tesla Model 3 - China Market Delivery Ceremony Tesla Model 3 - China Market Delivery Ceremony 2019-03-15 - On January 22, 2019, the Model 3 China Market Delivery Ceremony...
Motor vehicle retroreflector product CCAP mark certification Motor vehicle retroreflector product CCAP mark certification 2019-03-12 - In order to implement the spirit of the China National Ce...
detailed implementation rules for audio and video equipment revised detailed implementation rules for audio and video equipment revised 2019-03-10 - China Quality Certification Center (CQC) revised the regulation...
New detailed implementation rules for mobile power supplies for portable digital devices published New detailed implementation rules for mobile power supplies for portable digital devices published 2019-03-08 - According to a recent announcement of the China Quality C...
Tesla`s super factory being established in Shanghai Tesla`s super factory being established in Shanghai 2019-03-07 - As reported from Sina Auto that on January 7,2019 Tesla CEO...
detailed implementation rules for lighting appliances revised detailed implementation rules for lighting appliances revised 2019-03-06 - CQC (China Quality Certification Centre) recently revised...

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top