In order to implement the spirit of the China National Certification and Accreditation Administration's "Guiding Opinions on Further Promoting Voluntary Product Certification", to ensure the "Notice of the Certification and Supervision Commission of the General Administration of Markets on Further Implementing the Catalogue of China Compulsory Certification (China CCC) and the Reform of Implementation Methods" (Joint Announcement 2018), China Automobile Certification Center Co., Ltd. (CCAP) introduced CCAP mark certification business as follows:
 
Product: motor vehicle retroreflector
 
Implementation Rule: CCAP-GZ-4135:2018 Motor Vehicle Product CCAP Mark Certification Implementation Rules Motor Vehicle Retroreflector
 
GB standard GB: 11564-2008 motor vehicle retroreflector
 
The application for CCAP mark certification of the above product shall be accepted from now on.
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us.
 
Source: CCAP News
China Quality Certification Center (CQC) revised the regulation CQC-C0801-2016 "detailed implementation regulation for China Compulsory Certification products - Audio and Video Equipment", CQC-C0901-2016 "detailed implementation regulation for China Compulsory Certification products - Information Technology Equipment" and CQC-C1601-2016 "detailed implementation regulation for China Compulsory Certification products - Telecommunications Terminal Equipment". The main contents of this revision are:
 
- According to the Joint Announcement of the General Administration of Market Supervision and the National Certification and Accreditation Administration No. 11 of 2018, products such as imaging (showing) tubes, antenna amplifiers, computer game machines, learning machines, modems (including cards) and ISDN terminals are not ccc relevant.
- It is clear that Class D companies are sampled at least once a year.
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us
 
Source: CQC Notice
According to a recent announcement of the China Quality Certification Center (CQC), the detailed implementation regulation for Mobile Power are updated as follows:
 
- Implementation rules: CQC11-464116-2016 "Portable Mobile Power Security Certification Rules" has been revised.
 
- New standard GB/T35590-2017 "General specification for mobile power supply for portable digital devices for information technology" for China Compulsory certification (China CCC) published.
 
For general information about the China CCC please look at chapter CCC through CCC procedureIf you have any questions, please contact us.
 
Source: CQC Notice
As reported from Sina Auto that on January 7,2019 Tesla CEO Elon Musk said on Twitter: "I look forward to today's Tesla Shanghai Super Factory (Gigafactory) broke ground!" Currently, Musk also revealed through Twitter that The first phase of the Shanghai plant will be completed this summer, and the Model 3 model will be mass-produced at the end of the year. According to Musk, the Shanghai plant will include Model 3 and Model Y, and the vehicles produced will be sold only in China. Model X and Model S and high-end Model 3 and Model Y will still be produced in the US and exported to China.
 
Motor vehicle and a list of vehicle components need a China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
 
Source: CAAM News
CQC (China Quality Certification Centre) recently revised the detailed implementation regulations for lighting appliances: CQC-C1001-2014 China CCC (China Compulsory Certification) .
 
The main contents of the revision are:
 
Annex 3: China CCC Certification Key Components and Materials for Lighting Appliances - List of Key Components and Materials for Luminaires: Add Class B key components "rail adapters".
 
Annex 3: China CCC certification key components and materials for lighting appliances - LED modules use DC or AC electronic control devices to remove the key components of the Class B "control port", the key component "photocoupler" classification changed from A to B, key elements The device "transformer for LED control device". The classification changed from B to A.
 
This revision of the rules are relevant for the already issued CCC certificates. The natural transition is allowed. The applicant can complete the certificate conversion work in combination with product changes.
 
For general information about the China CCC  (China Compulsory Certification) please look at chapter CCC through CCC procedure If you have any questions, please contact us.
 
Source: CQC Notice
Magna and Renesas Electronics are working together to develop a more cost-effective 3D look-around system tailored for entry-level and mid-range cars. The two companies said that the application of the new camera has enabled many car companies to apply 3D camera technology to more product lines. A European car company will be the first one to integrate the 3D surround system into its future vehicles, but neither has disclosed the name of the car. The technology combines Magna's 3D surround camera system with Renesas Electronics' system-on-a-chip to integrate the camera into the vehicle's computer system. The system provides the driver with a 360-degree vehicle environment, and Magna said that the aerial view of the current parking assistance system has also been significantly upgraded. The driver can use the on-board interface to adjust the environmental attempt, and its target detection function can send a reminder to the driver to inform them of obstacles on the driving path. According to Magna, the system can minimize integration time and development costs, providing an easy-to-use, cost-effective camera solution for car companies.
 
Motor vehicle and a list of vehicle components need a China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
 
Source: CAAM News
From January 23 to January 24, 2019, CQC ("China Quality Certification Centre"), as the secretariat organisation, hosted the annual working meeting of the China Compulstory Certification (CCC) Technical Expert Group (TC25). Zhang Wei, Director of Certification Quality Department of the Certification and Supervision Department of the SAMR ("State Administration for Market Regulation") , Wang Junfeng, Vice Director, and Zeng Guangfeng, Deputy Director of CQC, and representatives of more than 30 expert groups from nearly 20 organisations including Beijing Customs, Dalian Customs and China Automobile Certification Center (CCAP) attended the meeting. The participating experts carefully checked the correspondence between the customs HS code and the China CCC catalogue products in 2019, compiled the corresponding relationship form and it will be announced on the website of the CNCA ("Certification and Accreditation Administration") to ensure the import supervision and customs clearance of products in the China CCC catalogue, and provide strong support for entry verification and technical support.
 
For general information about the China CCC please look at chapter CCC through CCC CCC procedureIf you have any questions, please contact us.
 
Source: CQC News
The low beam of the new Audi A8 headlights is equipped with a compact LED lens module featuring. The module consists of glass and integrated primary and secondary optics to minimize Scatter loss. According to reports, Audi and Hella have cooperated to launch several front lamp products to provide more sccurate and dynamic lighting services while enhancing the driver's vision. The two companies provided a high-performance LED lens module for the new Audi A8, which was mass-produced for the first time. In addition, they also developed the new HD Matrix LED headlight technology and dynamic laser high beam technology.
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
 
Source: CAAM News
Components in the vehicle interior and engine compartment are combustible materials.

FAQ

You have general questions about the CCC. This page gives you a brief overview of the topics that you will be accompanying at the CCC. For more details about your product you can look around in the product area.
In this section you will get a list of all products which are relevant to CCC. Here you can see the most important informations and laws.
The CCC certification process consists of eight phases: application, verification of documents, provision of test samples, testing of samples, factory inspection, conformity assessment, certificate approval, certificate issuance.
Automobiles are non-rail vehicles that are powered, have four or more wheels, and non-powered road vehicles that are designed and manufactured to be towed by vehicles and can normally be used on roads.
3C certification is referred to as a "mandatory product certification system". It is a product conformity assessment system for the Chinese government to protect consumers' personal safety and national security, to strengthen product quality management, and to implement it in accordance with laws and regulations. The so-called 3C certification is China's compulsory product certification system, the English name China Compulsory Certification, the English abbreviation CCC.

CCC News

Geely set up engineering R & D center in Germany Geely set up engineering R & D center in Germany 2019-05-18 - According to the China News Service Beijing on May 16 that...
Implementation Rules for Urban Rail Transit Equipments Released Implementation Rules for Urban Rail Transit Equipments Released 2019-05-06 - According to a recent announcement from the China Certification...
business scopes of test laboratories for China CCC products updated business scopes of test laboratories for China CCC products updated 2019-04-29 - business scopes of selected test laboratories for China CCC...
21 new and revised GB Standards released 21 new and revised GB Standards released 2019-04-19 - According to a recent press from the State Council of P.R.C,...
177 new and revised GB Standards released 177 new and revised GB Standards released 2019-04-04 - According to a recent press from the State Council of P.R.C,...
Daimler will invest 500 million euros to produce electric vehicles Daimler will invest 500 million euros to produce electric vehicles 2019-03-24 - The Daimler Group will invest 500 million euros (approximately...
GB Standards for China CCC automobile products updated GB Standards for China CCC automobile products updated 2019-03-17 - according to a recent announcement of CNCA (China National...
Tesla Model 3 - China Market Delivery Ceremony Tesla Model 3 - China Market Delivery Ceremony 2019-03-15 - On January 22, 2019, the Model 3 China Market Delivery Ceremony...
Motor vehicle retroreflector product CCAP mark certification Motor vehicle retroreflector product CCAP mark certification 2019-03-12 - In order to implement the spirit of the China National Ce...
detailed implementation rules for audio and video equipment revised detailed implementation rules for audio and video equipment revised 2019-03-10 - China Quality Certification Center (CQC) revised the regulation...

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top