According to a recent joint announcement by the SAMR ("State Administration for Market Regulation") and the CNCA ("Certification and Accreditation Administration of the PRC""), 12 products were deleted from the China CCC catalog, i.e. these products are not ccc relevant from the 5th december 2018. Here is an unofficial translation:
 
Reciprocating saw CNCA-C05-01:2014
Plug-in concrete vibrator CNCA-C05-01:2014
Electric wood milling and trimming machine CNCA-C05-01:2014
Electric stone cutting machine CNCA-C05-01:2014
Wire feeding device CNCA-C06-01:2014
TIG welding torch CNCA-C06-01:2014
MIG/MAG welding torch CNCA-C06-01:2014
Welding clamp CNCA-C06-01:2014
Copier CNCA-C09-01:2014
Motor vehicle return reflector CNCA-C11-07:2014
Anti-theft safe deposit box CNCA-C19-02:2014
Anti-theft safe CNCA-C19-02:2014
 
4 products from the China CCC catalog can be certified by the new certification procedure self-declaration:
 
Tuning receivers and radios for various broadcast bands CNCA-C08-01:2014
Motor vehicle indirect field device CNCA-C11-08:2014
Motor vehicle recorder CNCA-C11-14:2014
Motor vehicle body reflective sign CNCA-C11-13:2014
 
For general information on the China CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
According to a recent press released from the Standardization Administration of the People's Republic of China (SAC), 27 New GB Standards ("GB", "GuoBiao") were released on 19 November 2018.
 
GB 3847-2018 (replaced GB 3847-2005) 
Diesel vehicle pollutant emission limits and measurement methods (free acceleration method and loading deceleration method)
implementation date: 2019-04-01
 
GB 5763-2018 (replaced GB 5763-2008) 
Automotive brake lining
implementation date: 2019-10-01
 
GB 18285-2018 (replaced GB 18285-2005) 
Gasoline vehicle pollutant emission limit and measurement method (double idle method and simple working condition method)
implementation date: 2019-04-01
 
More new GB Standards please see here
 
If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: SAC News

according to the latest press from CAAM, China Geely Auto Group will work with Smart Eye in Sweden to develop a series of high-end automotive safety systems using Smart Eye's artificial intelligence (AI) driver-monitoring (DMS) technology. This may make semi-automatic driving possible. By studying the movement of the eyes, face and head, Smart Eye's technology helps to understand the attention of Geely's drivers, whether they are focused and whether they are dozing off while driving. The purpose of this technology is to understand and assist the driver in taking action in a risky traffic situation. The vast majority of traffic accidents in the world are caused by drivers' inattention or injury, such as using mobile devices, chatting with other passengers, or sudden illness. As a result, Smart Eye has developed driver monitoring technology to prevent traffic accidents and save lives. This driver monitoring technology will work with the first level 3 advanced driver assistance system and enhance advanced driver assistance system functions for Geely.

Motor vehicle and a list of vehicle components need a China CCC Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CAAM News

 

according to the MIIT (Ministry of Industry and Information Technology of the PRC), 14 new GB-Standards (GuoBiao) were drafted or revised and will be published on the 9th september 2018. Here is an unofficial translation of the new GB Standards and the standards that will be replaced:

Name of Standard replaced
Flammability characteristics of interior materials for bus /
Safety requirements and test methods for automotive fuel tanks and installation GB18296-2001
Car seat, seat fixing device and headrest strength requirements and test methods GB15083-2006
Road vehicle identification code (VIN) GB16735-2004
Road Vehicle World Manufacturer Identification Number (WMI) GB16737-2004
Road transporting liquid dangerous goods tank vehicles - Part 1: Technical requirements for metal normal pressure tanks GB18564.1-2006
Vehicle speed limit system technical requirements and test methods GB/T24545-2009
Safety requirements for electric motorcycles and electric mopeds GB 24155-2009
Motorcycle and moped fuel consumption limits and methods of measurement GB15744-2008, GB16486-2008
Installation regulations for external lighting and light signal devices for automobiles and trailers GB4785-2007
Information technology equipment - Safety - Part 21: Remote feeds /
Information technology equipment - Safety - Part 22: Equipment for outdoor installation /
Security of electronic devices that are electrically connected to the communication network /
Motor vehicle child occupant restraint system GB27887-2011

Motor vehicle and a list of vehicle components need a China CCC Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: MIIT Standard

As the China-US trade war heats up, on July 6, China’s import tariff on US vehicles raised from 15% to 40%. Affected by this, Tesla's products sold in the Chinese market have all raised prices. The average price of the Tesla Model S and Tesla Model X models increased by 100,000 yuan (around 14.000 USD),  the price of Model S 75D basic models increased from 710,600 yuan to 849,900 yuan, it was an increase of 139,400 yuan (around 20.000 USD), the price of the SUV Model X high-end models rose from 1,350,600 yuan to 1,572,200 yuan, an increase of 256,600 yuan (around 37.000 USD)

Motor vehicle and a list of vehicle components need a China CCC Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

 

Source: CAAM News

 
According to China Automotive Industry Information Network, since mid-June, the new energy auto industry has nearly 30 joint ventures. Involved in the field of new energy vehicles, batteries, intelligent network, travel, network car, charging piles, e.g.:
05.07.2018: General Motors, Honda and BYD Auto, in the field of Electrification agreement
09.07.2018: Daimler and Tsinghua University, in the field of Auto driving, intelligent transportation
09.07.2018: Volkswagen and Anhui Jianghuai Automobile, new energy
10.07.2018: Audi and Huawei,Intelligent network
10.07.2018: BMW, Great Wall,new energy
10.07.2018: BAIC BJEV, Magna, new energy
etc.
Motor vehicle and a list of vehicle components need a China CCC Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

According to a recent press release from CCAP, the new standard GB 4660-2016 ("GuoBiao") for headlights from 1 January 2017 came into force and this replaces the "old" standard GB 4660-2007. Furthermore, a new Technical Resolution TC11-2017-02 was published.

Which test and which standard were listed in detail, you will find more informaiton on TC11-2017-02.

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

 

According to a recent press release by CNCA, a series of new regulations on CCC Marking Permission ("Permission of Printing", "PoP", "CCC Mark") have been published: The translated text can be found below.

 Bildergebnis für china ccc printing permission

From 20 March the respective certification organization is responsible for the irregular CCC Mark. Irregular CCC mark are CCC mark, which with "PRINTED, PRESSED, MOLDED, SCREEN-PRINTED "," PAINTED "," ETCHED "," CARVED"is introduced on the product.

According to the current state, no official new PoP will be issued. We as a service provider in the area of ​​CCC will issue you a PoP that we have checked.

And from 20 March 2018 will be a uniform CCC Mark without specific mark such as "S (Safety Products)", "EMC (Electro Magnetic Compatibility)", "S & E (Safety & Electro Magnetic Compatibility)", "F (Fire Fighting)" , "I (Information Security)" used. Plant that already has a valid CCC cert. and has a valid CCC mark, it can continue to use.

Source: CNCA Notice (No.10, 2018)

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

 

公告 国家 公告 公告 CNCA notice

发布 日期 Date: 2018-03-15

2018 年 第 10 号: 2018 (No.10)

网址 Source: http://www.cnca.gov.cn/xxgk/ggxx/2018/201803/t20180315_56469.shtml

国家 认监委 关于 强制性 产品 认证 标志 改革 事项 的 公告

Notice of Change of CCC Mark for CCC Products

一, 取消 印刷 / 模压 CCC 标志 的 审核 和 收费

Fee for printing permission not applicable (read more!)

1. 自 2018 年 3 月 20 日 起, 取消 指定 标志 发放 管理 机构 (北京 中 强 认 产品 标志 技术 服务 中心) 对 印刷 / 模压 CCC 标志 的 审核, 并 取消 相应 的 审核 收费, 由 获证 企业 自行 印刷 / 模压CCC 标志.

1. Beginning with 20 March 2018, the use of CCC Marking will not be reviewed by the previous CCC (CCC Mark Issuance & Management Center = Marking Center) and the fee for Printing Permission will be waived. Manufacturers can even mark CCC Logo on the successfully certified product without applying for the Printing Permission, as long as the size ratio and the existing marking regulations are adhered to (eg CCC logo not deformed, ratio of width to height 1,27: 1, etc.) ,

2. 获证 企业 自行 印刷 / 模压 CCC 标志 按照 "强制性 产品 认证 标志 加 施 管理 要求" (见 附件 1) 执行.

Manufacturers who have valid CCC certificates may mark the CCC logo according to the "CCC Mark Processing and Management Requirement" (see Appendix 1) on the successfully certified product

二, 关于 标准 规格 CCC 标志 的 发放 管理

About the exhibition management of the regular CCC mark (regular CCC mark = purchased standard CCC mark)

1.自2018年5月1日起,指定认证机构承担标准规格CCC标志的发放管理工作,收费按照《国家发展改革委关于放开部分检验检测经营服务收费的通知》(发改价格〔2015〕1299号)规定执行。

1. AB 1 May 2018 takes over the respective certification organization responsible for issuing the regular CCC mark. The fee will be charged according to the National Development and Reform Commission Notice 2015〕 no. 1299) paid.

2.2018 5 年 月 1 日前, 各 指定 认证 机构 应 完成 标准 规格 CCC 标志 发放 管理 的 各项 准备 工作, 包括 CCC 标志 发放 管理 程序, 联系人, 联系 电话 等, 并 予以 公布.

2. BIS 1 May 2018 should have prepared the respective certification organization to work with the exhibition management of the regular CCC marking. The procedure for the exhibition management of the CCC marking, the contact details of the contact person as well as telephone number, etc. are to be announced.

3.指定标志发放管理机构(北京中强认产品标志技术服务中心)承担标准规格CCC标志的发放管理工作至2018年5月31日,自2018年6月1日起,不再承担标准规格CCC标志的发放工作。

3. The previous exhibition organization of CCC Mark (Beijing CCC Mark Product Mark Technical Service Center = Marking Center) is only BIS 31 Mai 2018 responsible for issuing the regular CCC mark. From 1. June 2018, this exhibition organization is NOT responsible for issuing the regular CCC mark.

三, 简化 整合 CCC 标志 的 类别

Simplification and standardization of the categories of CCC marking

自 2018 年 3 月 20 日 起, CCC 标志 不再 标注 S (安全 产品), EMC (电磁 兼容), S & E (安全 与 电磁 兼容), F (消防), I (信息 安全) 等 细分 类别, 原有 CCC 标志 可 根据 模具 更换 周期 及 产品 库存 等 情况 自然 过渡 淘汰.

From 20 March 2018 will have a uniform CCC mark without specific markings such as "S (Safety Products)", "EMC (Electro Magnetic Compatibility)", "S & E (Safety & Electro Magnetic Compatibility)", "F (Fire Fighting)", "I (Information Security)" used. Manufacturer who has a valid CCC certificate and a CNCA issued Printing Permission, this change can be made individually.

四, 加强 CCC 标志 加 施行 为 的 后续 监管

Increased control of the use of CCC marking

获证 企业 在 加 施 标准 规格 CCC 标志 以及 自行 印刷 / 模压 CCC 标志 时, 应 严格 按照 "强制性 产品 认证 标志 加 施 管理 要求" 和 "强制性 产品 认证 实施 规则" 的 相关 要求, 建立 本 单位 的CCC 标志 使用 和 管理 制度, 并对 CCC 标志 的 使用 情况 进行 记录 和 存档.

Manufacturers using regular CCC markings or irregular CCC markings must set up their own CCC usage and management system in accordance with the CCC Mark Processing and Management Requirement and CCC Product Implementation Rule requirements, and use CCC marking be logged and archived.

 

指定 认证 机构 应 加强 对 CCC 标志 的 监督 管理 工作, 指导 获证 企业 正确 使用 CCC 标志, 落实 认证 机构 主体 责任.

The respective certification organization should strengthen the review and control work for the use of CCC mark. Manufacturers can obtain information from the respective certification organization for the correct use of the CCC marking.

各级 地方 认证 监督 管理 部门 应 加强 对 加 施 CCC 标志 的 监督 管理 和 执法 检查.

The authority is to strengthen the monitoring and control work for the use of CCC marking.

五, 其他 事项

Further information

原 "强制性 产品 认证 标志 管理 办法" (国家 认监委 公告 2001 年 第 1 号) 及 "关于 强制性 产品 认证 标志 发放 管理 相关 事项 的 公告" (国家 认监委 公告 2002 年 第 7 号) 同时废止.

The former "CCC Product Certification Mark Management Method" (CNCA no.1 2001) and "CCC Product Certificate Mark Issuance Management Announcement" (CNCA no.7 2002) have been canceled.

 

Components in the vehicle interior and engine compartment are combustible materials.

FAQ

You have general questions about the CCC. This page gives you a brief overview of the topics that you will be accompanying at the CCC. For more details about your product you can look around in the product area.
In this section you will get a list of all products which are relevant to CCC. Here you can see the most important informations and laws.
The CCC certification process consists of eight phases: application, verification of documents, provision of test samples, testing of samples, factory inspection, conformity assessment, certificate approval, certificate issuance.
Automobiles are non-rail vehicles that are powered, have four or more wheels, and non-powered road vehicles that are designed and manufactured to be towed by vehicles and can normally be used on roads.
3C certification is referred to as a "mandatory product certification system". It is a product conformity assessment system for the Chinese government to protect consumers' personal safety and national security, to strengthen product quality management, and to implement it in accordance with laws and regulations. The so-called 3C certification is China's compulsory product certification system, the English name China Compulsory Certification, the English abbreviation CCC.

CCC News

Geely set up engineering R & D center in Germany Geely set up engineering R & D center in Germany 2019-05-18 - According to the China News Service Beijing on May 16 that...
Implementation Rules for Urban Rail Transit Equipments Released Implementation Rules for Urban Rail Transit Equipments Released 2019-05-06 - According to a recent announcement from the China Certification...
business scopes of test laboratories for China CCC products updated business scopes of test laboratories for China CCC products updated 2019-04-29 - business scopes of selected test laboratories for China CCC...
21 new and revised GB Standards released 21 new and revised GB Standards released 2019-04-19 - According to a recent press from the State Council of P.R.C,...
177 new and revised GB Standards released 177 new and revised GB Standards released 2019-04-04 - According to a recent press from the State Council of P.R.C,...
Daimler will invest 500 million euros to produce electric vehicles Daimler will invest 500 million euros to produce electric vehicles 2019-03-24 - The Daimler Group will invest 500 million euros (approximately...
GB Standards for China CCC automobile products updated GB Standards for China CCC automobile products updated 2019-03-17 - according to a recent announcement of CNCA (China National...
Tesla Model 3 - China Market Delivery Ceremony Tesla Model 3 - China Market Delivery Ceremony 2019-03-15 - On January 22, 2019, the Model 3 China Market Delivery Ceremony...
Motor vehicle retroreflector product CCAP mark certification Motor vehicle retroreflector product CCAP mark certification 2019-03-12 - In order to implement the spirit of the China National Ce...
detailed implementation rules for audio and video equipment revised detailed implementation rules for audio and video equipment revised 2019-03-10 - China Quality Certification Center (CQC) revised the regulation...

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top