According to a recent press release by CNCA, a series of new regulations on CCC Marking Permission ("Permission of Printing", "PoP", "CCC Mark") have been published: The translated text can be found below.

 

From 20 March the respective certification organization is responsible for the irregular CCC Mark. Irregular CCC mark are CCC mark, which with "PRINTED, PRESSED, MOLDED, SCREEN-PRINTED "," PAINTED "," ETCHED "," CARVED"is introduced on the product.

According to the current state, no official new PoP will be issued. We as a service provider in the area of ​​CCC will issue you a PoP that we have checked.

And from 20 March 2018 will be a uniform CCC Mark without specific mark such as "S (Safety Products)", "EMC (Electro Magnetic Compatibility)", "S & E (Safety & Electro Magnetic Compatibility)", "F (Fire Fighting)" , "I (Information Security)" used. Plant that already has a valid CCC cert. and has a valid CCC mark, it can continue to use.

Source: CNCA Notice (No.10, 2018)

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

 

公告 国家 公告 公告 CNCA notice

发布 日期 Date: 2018-03-15

2018 年 第 10 号: 2018 (No.10)

网址 Source: http://www.cnca.gov.cn/xxgk/ggxx/2018/201803/t20180315_56469.shtml

国家 认监委 关于 强制性 产品 认证 标志 改革 事项 的 公告

Notice of Change of CCC Mark for CCC Products

一, 取消 印刷 / 模压 CCC 标志 的 审核 和 收费

Fee for printing permission not applicable (read more!)

1. 自 2018 年 3 月 20 日 起, 取消 指定 标志 发放 管理 机构 (北京 中 强 认 产品 标志 技术 服务 中心) 对 印刷 / 模压 CCC 标志 的 审核, 并 取消 相应 的 审核 收费, 由 获证 企业 自行 印刷 / 模压CCC 标志.

1. Beginning with 20 March 2018, the use of CCC Marking will not be reviewed by the previous CCC (CCC Mark Issuance & Management Center = Marking Center) and the fee for Printing Permission will be waived. Manufacturers can even mark CCC Logo on the successfully certified product without applying for the Printing Permission, as long as the size ratio and the existing marking regulations are adhered to (eg CCC logo not deformed, ratio of width to height 1,27: 1, etc.) ,

2. 获证 企业 自行 印刷 / 模压 CCC 标志 按照 "强制性 产品 认证 标志 加 施 管理 要求" (见 附件 1) 执行.

Manufacturers who have valid CCC certificates may mark the CCC logo according to the "CCC Mark Processing and Management Requirement" (see Appendix 1) on the successfully certified product

二, 关于 标准 规格 CCC 标志 的 发放 管理

About the exhibition management of the regular CCC mark (regular CCC mark = purchased standard CCC mark)

1.自2018年5月1日起,指定认证机构承担标准规格CCC标志的发放管理工作,收费按照《国家发展改革委关于放开部分检验检测经营服务收费的通知》(发改价格〔2015〕1299号)规定执行。

1. AB 1 May 2018 takes over the respective certification organization responsible for issuing the regular CCC mark. The fee will be charged according to the National Development and Reform Commission Notice 2015〕 no. 1299) paid.

2.2018 5 年 月 1 日前, 各 指定 认证 机构 应 完成 标准 规格 CCC 标志 发放 管理 的 各项 准备 工作, 包括 CCC 标志 发放 管理 程序, 联系人, 联系 电话 等, 并 予以 公布.

2. BIS 1 May 2018 should have prepared the respective certification organization to work with the exhibition management of the regular CCC marking. The procedure for the exhibition management of the CCC marking, the contact details of the contact person as well as telephone number, etc. are to be announced.

3.指定标志发放管理机构(北京中强认产品标志技术服务中心)承担标准规格CCC标志的发放管理工作至2018年5月31日,自2018年6月1日起,不再承担标准规格CCC标志的发放工作。

3. The previous exhibition organization of CCC Mark (Beijing CCC Mark Product Mark Technical Service Center = Marking Center) is only BIS 31 Mai 2018 responsible for issuing the regular CCC mark. From 1. June 2018, this exhibition organization is NOT responsible for issuing the regular CCC mark.

三, 简化 整合 CCC 标志 的 类别

Simplification and standardization of the categories of CCC marking

自 2018 年 3 月 20 日 起, CCC 标志 不再 标注 S (安全 产品), EMC (电磁 兼容), S & E (安全 与 电磁 兼容), F (消防), I (信息 安全) 等 细分 类别, 原有 CCC 标志 可 根据 模具 更换 周期 及 产品 库存 等 情况 自然 过渡 淘汰.

From 20 March 2018 will have a uniform CCC mark without specific markings such as "S (Safety Products)", "EMC (Electro Magnetic Compatibility)", "S & E (Safety & Electro Magnetic Compatibility)", "F (Fire Fighting)", "I (Information Security)" used. Manufacturer who has a valid CCC certificate and a CNCA issued Printing Permission, this change can be made individually.

四, 加强 CCC 标志 加 施行 为 的 后续 监管

Increased control of the use of CCC marking

获证 企业 在 加 施 标准 规格 CCC 标志 以及 自行 印刷 / 模压 CCC 标志 时, 应 严格 按照 "强制性 产品 认证 标志 加 施 管理 要求" 和 "强制性 产品 认证 实施 规则" 的 相关 要求, 建立 本 单位 的CCC 标志 使用 和 管理 制度, 并对 CCC 标志 的 使用 情况 进行 记录 和 存档.

Manufacturers using regular CCC markings or irregular CCC markings must set up their own CCC usage and management system in accordance with the CCC Mark Processing and Management Requirement and CCC Product Implementation Rule requirements, and use CCC marking be logged and archived.

 

指定 认证 机构 应 加强 对 CCC 标志 的 监督 管理 工作, 指导 获证 企业 正确 使用 CCC 标志, 落实 认证 机构 主体 责任.

The respective certification organization should strengthen the review and control work for the use of CCC mark. Manufacturers can obtain information from the respective certification organization for the correct use of the CCC marking.

各级 地方 认证 监督 管理 部门 应 加强 对 加 施 CCC 标志 的 监督 管理 和 执法 检查.

The authority is to strengthen the monitoring and control work for the use of CCC marking.

五, 其他 事项

Further information

原 "强制性 产品 认证 标志 管理 办法" (国家 认监委 公告 2001 年 第 1 号) 及 "关于 强制性 产品 认证 标志 发放 管理 相关 事项 的 公告" (国家 认监委 公告 2002 年 第 7 号) 同时废止.

The former "CCC Product Certification Mark Management Method" (CNCA no.1 2001) and "CCC Product Certificate Mark Issuance Management Announcement" (CNCA no.7 2002) have been canceled.

 

Components in the vehicle interior and engine compartment are combustible materials.

FAQ

You have general questions about the CCC. This page gives you a brief overview of the topics that you will be accompanying at the CCC. For more details about your product you can look around in the product area.
In this section you will get a list of all products which are relevant to CCC. Here you can see the most important informations and laws.
The CCC certification process consists of eight phases: application, verification of documents, provision of test samples, testing of samples, factory inspection, conformity assessment, certificate approval, certificate issuance.
Automobiles are non-rail vehicles that are powered, have four or more wheels, and non-powered road vehicles that are designed and manufactured to be towed by vehicles and can normally be used on roads.
3C certification is referred to as a "mandatory product certification system". It is a product conformity assessment system for the Chinese government to protect consumers' personal safety and national security, to strengthen product quality management, and to implement it in accordance with laws and regulations. The so-called 3C certification is China's compulsory product certification system, the English name China Compulsory Certification, the English abbreviation CCC.

CCC News

Geely set up engineering R & D center in Germany Geely set up engineering R & D center in Germany 2019-05-18 - According to the China News Service Beijing on May 16 that...
Implementation Rules for Urban Rail Transit Equipments Released Implementation Rules for Urban Rail Transit Equipments Released 2019-05-06 - According to a recent announcement from the China Certification...
business scopes of test laboratories for China CCC products updated business scopes of test laboratories for China CCC products updated 2019-04-29 - business scopes of selected test laboratories for China CCC...
21 new and revised GB Standards released 21 new and revised GB Standards released 2019-04-19 - According to a recent press from the State Council of P.R.C,...
177 new and revised GB Standards released 177 new and revised GB Standards released 2019-04-04 - According to a recent press from the State Council of P.R.C,...
Daimler will invest 500 million euros to produce electric vehicles Daimler will invest 500 million euros to produce electric vehicles 2019-03-24 - The Daimler Group will invest 500 million euros (approximately...
GB Standards for China CCC automobile products updated GB Standards for China CCC automobile products updated 2019-03-17 - according to a recent announcement of CNCA (China National...
Tesla Model 3 - China Market Delivery Ceremony Tesla Model 3 - China Market Delivery Ceremony 2019-03-15 - On January 22, 2019, the Model 3 China Market Delivery Ceremony...
Motor vehicle retroreflector product CCAP mark certification Motor vehicle retroreflector product CCAP mark certification 2019-03-12 - In order to implement the spirit of the China National Ce...
detailed implementation rules for audio and video equipment revised detailed implementation rules for audio and video equipment revised 2019-03-10 - China Quality Certification Center (CQC) revised the regulation...

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top