On 22.12.2017, AQSIQ (General Administration of Qua- lity Supervision, Inspection and Quarantine of the PRC) has announced that as of 05.02.2018 there will be a recall for a potential hazard with the power steering parts from Mercedes in China. Affected are models of the A, B, C, E class and Mercedes GLA, GLC SUV, GLK from the years of construction from 2011 to 2017.


In China, play mat and puzzle mat products for children now require CCC certification. The products must be certified to 30.11.2018 according to the implementation regulation CNCA-13C and GB standard GB6675 CCC. Products without CCC may not be placed on the Chinese market from 1.12.2018. If you have any questions, please contact the contact.

Source: CNCA Announcement No. 41, 201

Works that only produce CCC-relevant spare parts ("spare part") do not need to be audited annually. However, certain conditions must be fulfilled. For factories that produce spare parts only in the first year and do not produce within the next four years, the surveillance audit will in principle be made at least once within the entire 5 years. If you have any questions, please contact the contact.

CCAP News (05.06.2017)

CNCA has released a series of new Chinese GB standards ("GuoBiao", National Standard). The Relevant Implementation Regulations and GB Standards are:


Implementing Regulation

New GB standard


To be replaced GB standards

Release Date

Date of implementation




GB 7258-2017

Safety specifications for power-driven vehicles operating on roads

GB 7258-2012





GB/T 4094.2-2017

Electric vehicles – Symbols for controls, indicators and tell-tales

GB/T 4094.2-2005




GB 11567-2017

Motor vehicles and trailers-lateral and rear underrun protection requirements

GB 11567.1-2001
GB 11567.2-2001




GB 13094-2017

The safety requirements for bus construction

GB 13094-2007
GB 18986-2003
GB/T 19950-2005




GB/T 18386-2017

Electric vehicles - Energy consumption and range - Test procedures.

GB/T 18386-2005



Source: CNCA Announcements: No. 23 and No. 26, 2017

New information regarding the CCC interpretation. In China, the new interpretation of the CCC implementation is currently being worked on.

Since the 2015 implementation caused considerable uncertainty, it was decided to publish a revised version.

As soon as this is available, it will be published on our page.

If you have any questions, please contact us.

CCC complete vehicle certification

Technical unit:

Factory audit (initial audit):

Factory audit (surveillance audit):

test samples:


The CNCA has introduced the obligation to certify motorcycle helmets.

The content of the certification is essentially the same as for the conventional CCC processes

     Initial sample test in China
     Factory audit
     follow up audits

For general information about the CCC please look at chapter CCC through CCC Procedure

The chinessiche version of the implementation guideline can be downloaded here

As part of the current investigations, the following has been stated in the CNCA-C11-09 2014.

Page 3: Application scope (2) soundproof and heatproof interior trimming materials used in engine compartment or
other heat source.

In this case, other components are included which are valid in the other heat source area. These include, for example, foam parts in the wheel well near the exhaust, or interior trim which are installed in heat source, eg. Seat foams.

For further questions please contact CONTACT



You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.



Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top