CNCA released china ccc certificaiton bodies for explosion protection products and Household Gas Appliances:
 
CNCA-C23-01: 2019 Implementation Regulation for Explosion-proof electrical appliances
 
China Quality Certification Center
CQM Certification Group Co., Ltd.
Nanyang Explosion-proof Electrical Research Institute Co., Ltd.
Shanghai Instrument and Instrument Automatic Control System Inspection and Testing Co., Ltd.
China Innovation Sea (Tianjin) Certification Service Co., Ltd.
Jiamusi Explosion-proof Motor Research Institute
 
CNCA-C24-01: 2019 Implementation Regulation for Household Gas Appliances
 
China Quality Certification Center
Beijing Jianheng Certification Center Co., Ltd.
China Municipal Engineering North China Design and Research Institute Co., Ltd.
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 
Source: CNCA No.18.2019

According to a recent press from the State Council of P.R.C, 10 new GB Standards ("GB", "GuoBiao") were released on 29 July 2019 by the Standardization Administration of the People's Republic of China (SAC) . Here are a list of GB Standards which are relevant to automobile products:

 

GB 15744-2019 Motorcycle and moped fuel consumption limits and methods of measurement GB 15744-2008, GB 16486-2008, Implementation date: 2020-07-01
GB 7258-2017 Motor Vehicle Operation Safety Technical Conditions "No. 1 Amendment" GB 7258-2012, Implementation date: 2019-07-29
 
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure
 

according to a recent announcement of CNCA, explosion protection products are CCC relevant from 01 October 2019. Explosion protection productsmust be CCC certified til 01 October 2020, i.e., explosion protection products can not be enter into and sold in the chinese market without CCC Certification from 01 October 2020. Here are a list of relevant explosion protection products:

CNCA-C23-01: 2019 Implementation Regulation for Explosion-proof electrical appliances
Explosion-proof motors,
Explosion-proof electric pump
Explosion-proof power distribution equipment
Explosion-proof switch, control and protection products
Explosion-proof starter products
Explosion-proof transformer products
Explosion-proof electric actuator, solenoid valve products
Explosion-proof plug-in device
Explosion-proof monitoring products
Explosion-proof communication, signal device
Explosion-proof air conditioning, ventilation equipment
Explosion-proof electric heating products
Explosion-proof accessories, Ex components
Explosion-proof instrumentation products
Explosion-proof sensor
Explosion-proof safety barrier products
Explosion-proof instrument box products
 
CNCA-C24-01: 2019 Implementation Regulation for Household Gas Appliances
Household gas cooker
Domestic gas fast water heater
Gas heating water heater
 
CNCA-C07-01: 2017 Implementation Regulation for household and similar equipment
Household refrigerators and food freezers
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 

According to a recent press from the State Council of P.R.C, 374 new and revised GB Standards ("GB", "GuoBiao") were released on 4 June 2019 by the Standardization Administration of the People's Republic of China (SAC) . Here are a list of GB Standards which are relevant to automobile products:

GB Standard Name Implementation Date
GB/T 5068-2019 Steel for railway locomotives and vehicle axles 2020-05-01
GB/T 19951-2019 Road vehicles Test methods for immunity to electrostatic discharge from electrical/electronic components 2020-01-01
GB/T 22135-2019 Commissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones 2020-01-01
GB/T 27542-2019 Battery Pallet Truck 2020-01-01
GB/T 37532-2019 Urban rail transit city express line 120 km / h ~ 160 km / h vehicle general technical conditions 2020-01-01
GB/T 37536-2019 Inspection specifications for testing equipment during motor vehicle inspection agencies 2020-01-01
GB/T 37677-2019 plain bearing automotive crankshaft bearing bush working environment recommended parameters 2020-01-01
 
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure
 
According to a recent press from the State Council of P.R.C, 173 new and revised GB Standards ("GB", "GuoBiao") were released on 10 May 2019 by the Standardization Administration of the People's Republic of China (SAC) . Here are a list of GB Standards which are relevant to automobile products:
 
GB Standard Name Implementation Date
GB/T 5624-2019 Automotive Maintenance Terminology 2019-12-01
General technical requirements for GB/T 17275-2019 freight towbar trailers GB/T 2019-12-01
GB/T 25024-2019 Locomotive bogies Freight car bogie GB/T 2019-12-01
GB/T 26766-2019 Urban public steam car vehicle intelligent terminal GB/T 2019-12-01
GB/T 37427-2019 Plastic acrylonitrile-butadiene-styrene (ABS) special materials for automobiles 2020-04-01
GB/T 37436-2019 Intelligent Transportation System Extended Reversing Auxiliary System Performance Requirements and Test Methods 2019-12-01
GB/T 37474-2019 Methods and requirements for the test of misuse of automotive airbag systems 2019-12-01
B/T 37706-2019 Technical requirements for installation and use of lifting tailgates for vehicles 2019-12-01
 
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure
 
according to a recent announcement of CNCA, business scope of the following accredited testing laboratories for China CCC products was updated as follows:
 
Zhejiang Fangyuan Testing Co. Ltd.
CNCA-C02-01: Circuit Switch and Electrical Equipment for Protection or Connection (Electrical Accessories)
 
Zhejiang Kezheng Electronic Information Product Testing Co. Ltd.
CNCA-C08-01: Audio and video equipment
CNCA-C09-01: Information Technology Equipment
CNCA-C16-01: The following products in telecom terminal equipment
 
Guangdong Jingzheng Testing Co. Ltd.
CNCA-C22-02: Toy Products
 
Jiangsu Jingrui Testing Technology Co. Ltd.
CNCA-C11-07:The following products in household and similar equipment
CNCA-C11-09: Automotive interior parts
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 

According to the China News Service Beijing on May 16 that the research and development center set up by Geely Automobile Group in Raunheim, Germany, has officially started its operations. The R&D center is close to Frankfurt Airport in Germany and will form a R&D team with about 300 engineers in the future to accelerate the technological development and business development of Geely Automobile Group in the new energy field. According to reports, the establishment of Geely Germany R&D Center will further improve Geely's global engineering research and development system. At present, Geely Automobile Group has five R&D centers. In addition to the above-mentioned new institutions, Geely Automobile Research Institute in Hangzhou Bay, Ningbo, China, Geely Automobile Europe R&D Center (CEVT) in Gothenburg, Sweden, and Hangzhou, China. R&D center in Coventry, UK. At present, Geely Automobile Group has more than 20,000 R&D designers, of which more than 2,500 are R&D experts in the field of new energy.

Motor vehicle and a list of vehicle components need a China Compulsory Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CAAM News

 

According to a recent announcement from the China Certification and Accreditation Administration ("CNCA"), CURC Certification for Urban Rail Transit Equipments were introduced. Relevant implementation rules are as follows:
 
CNCA-CURC-01:2019: Urban Rail Transit Equipment Product Certification Implementation Rules General Requirements
CNCA-CURC-02:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit vehicles
CNCA-CURC-03:2019: Urban Rail Transit Equipment Product Certification Implementation Rules Specific Requirements - Urban Rail Transit Braking System
CNCA-CURC-04:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit traction drive system
CNCA-CURC-05:2019: Urban rail transit equipment product certification implementation rules Specific requirements—urban rail transit electric bus train control and diagnosis system
CNCA-CURC-06:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit vehicle doors
CNCA-CURC-07:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit vehicle coupler buffer
CNCA-CURC-08:2019: Urban rail transit equipment product certification implementation rules Specific requirements—urban rail transit communication-based train operation control system (CBTC)
 
CURC Certification is similar as China Compulsory Certification (China CCC), a positive result of both type test of product and factory inspection are necessary in order to get the Certificate.
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us
 
Components in the vehicle interior and engine compartment are combustible materials.

FAQ

You have general questions about the CCC. This page gives you a brief overview of the topics that you will be accompanying at the CCC. For more details about your product you can look around in the product area.
In this section you will get a list of all products which are relevant to CCC. Here you can see the most important informations and laws.
The CCC certification process consists of eight phases: application, verification of documents, provision of test samples, testing of samples, factory inspection, conformity assessment, certificate approval, certificate issuance.
Automobiles are non-rail vehicles that are powered, have four or more wheels, and non-powered road vehicles that are designed and manufactured to be towed by vehicles and can normally be used on roads.
3C certification is referred to as a "mandatory product certification system". It is a product conformity assessment system for the Chinese government to protect consumers' personal safety and national security, to strengthen product quality management, and to implement it in accordance with laws and regulations. The so-called 3C certification is China's compulsory product certification system, the English name China Compulsory Certification, the English abbreviation CCC.

CCC News

New Implementation Regulation CNCA-C11-01 for Vehicle released New Implementation Regulation CNCA-C11-01 for Vehicle released 04-25-2020 -  on the 17 april 2020, a new implementation regulation...
Business Scopes of China CCC Certification Bodies updated Business Scopes of China CCC Certification Bodies updated 09-14-2019 -  CNCA released china ccc certificaiton bodies for explosion...
10 new chinese GB Standards released 10 new chinese GB Standards released 08-16-2019 - According to a recent press from the State Council of P.R.C,...
Explosion protection products CCC relevant Explosion protection products CCC relevant 07-17-2019 - according to a recent announcement of CNCA, explosion protection...
374 new and revised GB Standards released 374 new and revised GB Standards released 07-09-2019 - According to a recent press from the State Council of P.R.C,...
173 new and revised GB Standards released 173 new and revised GB Standards released 06-16-2019 - According to a recent press from the State Council of P.R.C,...
business scopes of accredited testing laboratories for CCC products updated business scopes of accredited testing laboratories for CCC products updated 05-30-2019 - according to a recent announcement of CNCA, business scope...
Geely set up engineering R & D center in Germany Geely set up engineering R & D center in Germany 05-18-2019 - According to the China News Service Beijing on May 16 that...
Implementation Rules for Urban Rail Transit Equipments Released Implementation Rules for Urban Rail Transit Equipments Released 05-06-2019 - According to a recent announcement from the China Certification...
business scopes of test laboratories for China CCC products updated business scopes of test laboratories for China CCC products updated 04-29-2019 - business scopes of selected test laboratories for China CCC...

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top