According to a recent press release by CCAA ("China Certification & Accreditation Association", "中国 认证 认可 协会"), 16's audit permissions have been revoked by Chinese auditors. It was found that the auditors had been unlawful either at registration or during the audit against the "Management System Auditor Registration Regulation", eg cheating of diplomas and work experience, failure to keep the audit plan, money under the table, as well as external auditors at the same time work as a Consultant or Legal Entity of a consulting firm, etc. 

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

(Source:CCAA News)

In the year of 2017, the regulations for the implementation of electric blankets (CNCA-C11-15: 2017) and motorcycle helmets (C07-01: 2017) have been approved by the Chinese authority CNCA ("Certification and Accreditation Administration of the People's Republic of China") 中国 国家 认证 认可监督 管理 委员会). The relevant GB standard for electric blankets is 4706.8-2008 and for motorcycle helmets GB 811-2010. According to a recent press release from CNCA, electric blankets and motorcycle helmets from 1 August 2018 without CCC may no longer be imported into China or sold on the Chinese market. If you have any questions, please use the Contact Us page. For general information on the CCC please look through the chapter CCC procedure

Source: CNCA notice No. 19 2018

 

According to a recent MOF press release, from 1 July 2018 will import 25% motor vehicle import tax, 20% 15%, and 8% 10% automotive parts and components. , 15%, 20%, 25% reduced to 6%. Further information about the HS Codes, Products, Import Tax, etc. can be found on "List of import tax for imported motor vehicles and automotive parts" (Source:MOF News 22 May 2018).

For general information on the CCC please look through the chapter CCC procedure, If you have any questions, please use the Contact Us page.

 

 

 

According to a recent press release from China Certification & Accreditation Association (CCAA), 542 has entered into new Chinese standards ("GB", "GuoBiao", "国 标") on 01.05.2018. Further information can be found on Source.

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

At 16.03.2015, we have the Chinese certification organization CGC (China General Certification, "中国 鉴 衡 认证") visited in Bejing content was cooperation in the field of China CCC certification, wind turbineCertification according to IEC 61400,solar productsCertification, etc.

 For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

 

On the 30. March 2018 has released the Chinese authority CNCA ("Certification and Accreditation Administration of the People's Republic of China") list of CCC certification organizations and testing laboratories for CCC products. In total, 25 accredited Chinese certification organizations and 212 accredited testing laboratories are the exact CCC product areas and testing areas on this list. The organizations and testing laboratories are responsible for the CCC certification and testing of the CCC compulsory products. Further information can be found on Main categories the CCC products.

Source: CNCA (Announcement no. 11, 2018).

For general information on the CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

 

 

As the current website of UPS shows, there are new regulations for importing into China. Attention is also drawn to the need for CCC certification, and the examination by the CIQ, further information can also be found on the pages of the CQC and CNCA.

UPS

More details can be found here

According to a recent joint announcement by the SAMR ("State Administration for Market Regulation") and the CNCA ("Certification and Accreditation Administration of the PRC""), 12 products were deleted from the China CCC catalog, i.e. these products are not ccc relevant from the 5th december 2018. Here is an unofficial translation:
 
Reciprocating saw CNCA-C05-01:2014
Plug-in concrete vibrator CNCA-C05-01:2014
Electric wood milling and trimming machine CNCA-C05-01:2014
Electric stone cutting machine CNCA-C05-01:2014
Wire feeding device CNCA-C06-01:2014
TIG welding torch CNCA-C06-01:2014
MIG/MAG welding torch CNCA-C06-01:2014
Welding clamp CNCA-C06-01:2014
Copier CNCA-C09-01:2014
Motor vehicle return reflector CNCA-C11-07:2014
Anti-theft safe deposit box CNCA-C19-02:2014
Anti-theft safe CNCA-C19-02:2014
 
4 products from the China CCC catalog can be certified by the new certification procedure self-declaration:
 
Tuning receivers and radios for various broadcast bands CNCA-C08-01:2014
Motor vehicle indirect field device CNCA-C11-08:2014
Motor vehicle recorder CNCA-C11-14:2014
Motor vehicle body reflective sign CNCA-C11-13:2014
 
For general information on the China CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top